The screen will display the upgrade mode (e.g., Allcode or Software) and ask you to select the file. Highlight the firmware file you copied to the USB drive. Press or Start to begin the process.
Ensure the drive is smaller than 32GB and formatted strictly to FAT32. Try a different USB brand if the issue persists. Upgrade File Not Found Satlink Ws-6979 Software Upgrade
from the device menu to ensure the new software initializes correctly. Key Benefits & Limitations Impact of Upgrade Sensitivity Improved locking speed for weak signals on some satellites. Data Accuracy The screen will display the upgrade mode (e
Always source your firmware from official distributor channels or recognized satellite enthusiast forums. Download files ending in the .bin format. Verify that the file is specifically built for the WS-6979; installing software designed for the WS-6933 or WS-6980 will permanently damage your meter. 2. Prepare a Compatible USB Flash Drive Ensure the drive is smaller than 32GB and
Press the Power button to boot up the device. Once the main interface loads, use the arrow keys on the keypad to navigate to the or Tools menu, then press OK . Step 3: Initiate the Upgrade
This is the most dangerous step. The internet is filled with fake or virus-laden "updaters" for the WS-6979. Do not download from random forum links without verification.