Plug your USB cable into the PC before opening the programming software. Open your Windows and check under "Ports (COM & LPT)" to identify which COM Port number (e.g., COM3) has been assigned to your cable. 2. Connect the Radio

Finding the correct programming software can be a challenge. This guide covers how to safely acquire the software, the hardware you need, and a step-by-step walkthrough to program your radio. What Software Does the VX-180 Use?

: Often used for export models or broader frequency support.

Always back up your current configuration. Click in the top menu and select Read (or click the upload icon). Allow the progress bar to finish. Immediately save this file as factory_backup.ce44 so you can restore the radio if something goes wrong. 5. Edit Your Channels You can now modify the frequency grid: RX/TX Frequencies: Input your authorized frequencies.

Always click the icon (or go to Radio > Read) before making changes. This pulls the current configuration from the radio. Save this file immediately as a backup. If something goes wrong, you can always flash this original file back to the radio to restore it. 5. Edit Frequencies

Once your changes are made, click (or Radio > Write). Do not unplug the cable or turn off the radio until the progress bar reaches 100% and the software confirms the upload was successful. Troubleshooting Common Issues