Smartpack2 Touch User Manual Jun 2026

Go to Menu > Commands > Battery Test and select Start . The controller will safely lower the rectifier output voltage, forcing the batteries to discharge into the load while monitoring their voltage drop over time.

When you first power on the SmartPack2 Touch, you will need to perform a basic setup to ensure accurate monitoring. Setting the Language and Time Navigate to .

A summary icon indicating the number of concurrent warnings or critical failures. Main Menu Navigation Paths

The controller is typically mounted on the front panel of the power system shelf for easy access. smartpack2 touch user manual

Insert the drive into the SmartPack2 Touch and select . Resetting the Controller

The SmartPack2 Touch provides detailed logs to help you identify system issues quickly. Common Alarm Types

If the screen becomes unresponsive, you can perform a "Soft Reset" by holding the pinhole reset button for 5 seconds. This will restart the controller without interrupting the DC power to your loads. Summary Table: Quick Commands Navigation Path Home Dashboard Change Voltage Settings > Power System > Voltage Control Export Logs Maintenance > USB > Export Logs Test Relays Maintenance > Diagnostics > Relay Test Go to Menu > Commands > Battery Test and select Start

Eltek Smartpack2 Touch User Manual: Complete Configuration & Operations Guide

Regular capacity testing identifies weak battery cells before they fail during a mains outage.

The touch screen, usually responsive, felt cold. He tapped the "Battery" icon to check the discharge rate. The display flickered. According to the manual, a red status LED meant a critical alarm, but the screen was showing a "Mains Out" warning that shouldn't be there—the generator was running perfectly. Setting the Language and Time Navigate to

The defining feature of this controller is its high-resolution color touch screen, which replaces complex physical keypad matrices with a modern, user-friendly graphical interface.

The SmartPack2 Touch utilizes a three-tier menu structure to prevent accidental parameter changes during production.

+------------------------------------------------------------+ | SMARTPACK2 TOUCH | | (Display, Touchscreen, Ethernet, USB, MicroSD, CAN Node) | +------------------------------------------------------------+ | Eltek CAN Bus | +------------------------------------------------------------+ | SMARTPACK2 BASIC | | (Control Logic, System Parameters, Alarm Evaluation) | +------------------------------------------------------------+ | Eltek CAN Bus | +------------------------------------------------------------+ | I/O MONITOR MODULES | | (Relays, Digital Inputs, Temp Sensors, Shunts, Fuses) | +------------------------------------------------------------+ Physical Interfaces & Ports

What (e.g., 24V, 48V, 60V) is your power plant running?