Bootrom Error Wait For Get Please Check Stb Uart Receive ((full)) Full Jun 2026
Use the Amlogic USB Burning Tool to burn a signed bootloader image to a MicroSD card.
This guide breaks down exactly what this error means and provides step-by-step troubleshooting methods to resolve it. Understanding the Error Use the Amlogic USB Burning Tool to burn
: Ensure the tool (e.g., GXDownloader_boot.exe or similar) is set to the correct speed, typically 115200 or 9600 . If you’ve seen the message “bootrom error wait
If you’ve seen the message “bootrom error wait for get please check stb uart receive full” on an embedded device (set-top box, router, development board, etc.), it means the boot ROM (first-stage firmware) tried to receive data over the serial/USB-serial (UART) interface during a recovery or firmware-download phase and encountered a communication problem. This post explains what the message means, common causes, and step‑by‑step fixes. : STB stands for Set-Top Box
Using a straight-through cable instead of a crossover cable (null modem) is the most common cause.
: STB stands for Set-Top Box . This error is hardcoded in many Chinese-manufactured STB bootloaders (e.g., HiSilicon Hi35xx, Huawei, ZTE). It is a polite but urgent request to inspect the STB’s physical state.
The you are using (e.g., GXDownloader, Putty, Hitool).





