Turn off the device. While holding the Return button, flip the power switch to ON. The screen should remain black, but the power light will stay lit. Connect to PC: Plug the
Look under . If you see a yellow exclamation mark, download and install the corresponding USB-to-Serial driver. Note the assigned COM Port number (e.g., COM3). Step 3: Launch the Upgrade Tool Unzip the downloaded update package on your PC.
Updating your allows you to add new satellites, refresh Transponder (TP) lists, and fix software bugs. Because this device uses a specialized Flash Loader tool, the process is more technical than a standard "plug-and-play" update. Preparation Checklist Before starting, ensure you have the following: USB to Mini-USB Cable : To connect the device to your PC.
Sometimes, you do not need a full system software update. If your device runs smoothly but cannot find specific satellites, you just need to update the default_dm.bin or satellite database file. satlink ws-6933 software update
Ensure the cable is secure and that you are using firmware specifically designed for the
or is connected to its power adapter to prevent a shutdown during the flash process. 2. Step-by-Step Update Process Check Current Version: Navigate to System Setup
When you connect the WS-6933 to your PC via the Mini-USB cable, Windows needs to recognize the internal chip (often a CH340 or PL2303 serial-to-USB converter). Connect the meter to your PC and turn it on. Open Windows . Turn off the device
A: Yes. Always back up your current database first (Menu → Data Transfer → Export to USB).
The WS-6933 hardware tuner is natively designed for . Modern satellites (particularly high-throughput satellites like Eutelsat Konnect or Yahsat) are increasingly utilizing:
Click the "Open" or "Browse" icon and select your downloaded . Connect to PC: Plug the Look under
Incompatible USB drive (too large, not FAT32, or USB 3.0). Fix: Try a 2GB or 4GB USB 2.0 drive. SanDisk and Kingston often work; PNY may not.
Ensure the cable supports data transfer, not just charging.
Once the display returns to normal and shows “Update Successful,” turn off the unit, remove the card, and turn it back on. Method 2: RS-232/USB PC Update
Satlink has released different hardware revisions of the WS-6933 over the years. ** firmware is not universally compatible across all variations.** Flashing the wrong file will corrupt the bootloader. Turn on your WS-6933. Navigate to the or About menu.
