dedicated servers only
Our VPN servers never save data that can be used to identify a customer.
Use our server-side multihop to seamlessly doublehop between endpoints.
Don't trust that we're not logging?
Use client-side multihop and connect to another VPN (or Tor) before you connect to us.
no proprietary code
Available for review here.
(too many) details on how the network operates available on our blog and on our
privacy policy page.
anonymous authentication
Access tokens are hashed before connecting. Compromised or confiscated servers can't be used to identify clients.
roots in Iceland, entities worldwide
No central office, anywhere.
Long press until "0;7d3;" appears 18;write_to_target_document7;default0;1b5;18;write_to_target_document1a;_Qn3uaYrfAtKLwbkPgMu7mQs_20;942;.
Once the digit is set, press and hold the button for 3 seconds to move to the next digit. Repeat the process for all digits.
What are you powering (e.g., solar inverter, battery bank, motor)? Share public link
The PZEM-051 requires an to measure current. Follow these steps carefully:
The meter provides a multi-function readout, typically cycling through:
A single button on the front panel controls the backlight, resets accumulated energy, and configures the high-voltage alarm threshold. 1. Backlight Control Short-press the button.
The PZEM-051 does not measure high current directly. It uses a . When 100 Amps flows through the shunt, a tiny 75 Millivolt (mV) drop is generated. The meter reads this voltage drop and calculates the current. Never connect the current sensing wires directly to your battery or load.
A single physical button on the front panel controls all display modes and settings. 1. Toggle Backlight (On/Off) Short press the button.
Connects to the small bolt on the battery pack side of the shunt.
The meter flashes the backlight if the system voltage goes above or below user-defined limits.
Long press until "0;7d3;" appears 18;write_to_target_document7;default0;1b5;18;write_to_target_document1a;_Qn3uaYrfAtKLwbkPgMu7mQs_20;942;.
Once the digit is set, press and hold the button for 3 seconds to move to the next digit. Repeat the process for all digits.
What are you powering (e.g., solar inverter, battery bank, motor)? Share public link
The PZEM-051 requires an to measure current. Follow these steps carefully:
The meter provides a multi-function readout, typically cycling through:
A single button on the front panel controls the backlight, resets accumulated energy, and configures the high-voltage alarm threshold. 1. Backlight Control Short-press the button.
The PZEM-051 does not measure high current directly. It uses a . When 100 Amps flows through the shunt, a tiny 75 Millivolt (mV) drop is generated. The meter reads this voltage drop and calculates the current. Never connect the current sensing wires directly to your battery or load.
A single physical button on the front panel controls all display modes and settings. 1. Toggle Backlight (On/Off) Short press the button.
Connects to the small bolt on the battery pack side of the shunt.
The meter flashes the backlight if the system voltage goes above or below user-defined limits.
