Renolink 1.87 Install Windows 10 Repack Online
If you are a DIY mechanic or a professional technician working on Renault or Dacia vehicles, you have likely heard of . This powerful software allows users to program keys, correct mileage, and access various control modules (UCH, Airbag, ABS, etc.) without the heavy price tag of a full dealer tool.
Open and expand the Ports (COM & LPT) section.
The software does not detect my OBD2 cable.
Upon reboot, press or F7 to select Disable driver signature enforcement . 💾 Step 2: Download and Extract Renolink 1.87
Locate and find USB Serial Port . It is often recommended to set this to COM4 if it isn't already. Renolink 1.87 Install Windows 10
Disable your Antivirus permanently for the Renolink folder, or re-apply the patch file (Step 4).
This step is often the source of the "Cannot get interface" error. Properly configuring the COM port ensures the software can communicate with your cable.
Launch the Renolink software for the first time by double-clicking the shortcut.
Right-click the renolink.exe file, choose , go to the Compatibility tab, check the box for Run this program as an administrator , and click Apply . 🛠️ Step 6: Testing the Connection If you are a DIY mechanic or a
Right-click the port -> -> Port Settings -> Advanced : Bits per second : 115200.
A laptop or desktop running Windows 10 (64-bit is recommended). Port: A functional USB 2.0 or USB 3.0 port. Software Preparation
Once installed, the software provides deep access to vehicle electronic control units (ECUs):
Connect your Renolink / OBDLINK SX cable to a USB port on your computer. Extract your downloaded Renolink 1.87 folder. Locate the folder named or FTDI Drivers . The software does not detect my OBD2 cable
For more detailed guidance on specific features, you can refer to the Renolink Software User Manual or check for official updates on Renolink.store Are you planning to use this for key programming clearing crash data , as the setup steps for those specific tasks can vary?
Once the interface opens, look at the bottom status bar. It should display the connected and show a green connection status.
| Component | Requirement | |-----------|-------------| | OS | Windows 10 Pro/Enterprise (32-bit recommended for legacy driver compatibility) | | Architecture | x86 or x64 | | RAM | 4 GB minimum | | Hard Drive | 500 MB free space | | Interface | USB 2.0 port (avoid USB 3.0 for some cables) | | Adapter | Renolink compatible OBD interface (FTDI or CH340 based) |
. This is critical for the computer to recognize the OBD2 cable. Software Setup renolink_setup87 installer. Choose your destination folder (typically C:\Program Files\Renolink ) and complete the installation. File Activation renolink.dat executable from your source folder. Paste these directly into the installation directory at C:\Program Files\Renolink , overwriting any existing files if prompted. COM Port Configuration Connect your Renolink interface to your laptop's USB port. Device Manager and find the USB Serial Port under "Ports (COM & LPT)". Right-click the port -> Properties Port Settings COM Port Number (or the port specified by your software version). Change the Latency Timer (msec) to ensure stable communication with the vehicle's ECU. Key Features of v1.87 ECU Programming : Clear crash data, program keys, and read/write EEPROM. Broad Compatibility
Right-click the Renolink desktop icon, select Properties, and force the tool to run in Compatibility Mode for Windows 7 . Ensure administrative rights are checked.
Never run the installer directly from a compressed .zip or .rar folder.