Tower Crane Dismantling | Method Statement

A mobile crane with sufficient capacity and reach (e.g., a 250-ton or 500-ton crane). Hand Tools: Impact wrenches, drift pins, and sledgehammers.

The objective is to dismantle the tower crane using a mobile crane or a derrick crane, ensuring the safety of personnel, the structural integrity of the building, and the protection of the public. 2. Pre-Dismantling Requirements Before any work begins, the following must be in place:

Responsible for the lift plan and overall management. Crane Supervisor: Oversees the dismantling team on-site.

Fall Protection: Full-body harness with dual lanyard and shock absorber (mandatory for all riggers working at heights). tower crane dismantling method statement

Rig the slewing assembly (including the ring gear, motors, and upper/lower slewing platforms) to the assist crane.

For large tower cranes, an entire sequence of controlled lifts is executed to dismantle the crane piece by piece: climbing frame, cab assembly, and tower sections.

Skilled team performing the mechanical disassembly. 3. Equipment & Tools A mobile crane with sufficient capacity and reach (e

A Tower Crane Dismantling Method Statement is a critical safety document that outlines the step-by-step process, equipment requirements, and risk mitigation strategies for removing a crane from a construction site 1. Preliminary Preparations

This document serves as a blueprint to ensure all operations comply with local occupational health and safety regulations, manufacturer specifications, and site-specific safety plans. Scope of Work

This article is for informational purposes only. Always consult applicable regulations, manufacturer instructions, and qualified engineering professionals when developing a tower crane dismantling method statement for a specific project. Fall Protection: Full-body harness with dual lanyard and

If the lift impacts public roads or pathways, implement pre-approved traffic management plans, road closures, or pedestrian diversions.

Perform a joint walk-through with the project manager to formally declare the area safe for other construction trades to return. 8. Emergency and Contingency Arrangements