: Open the Parameter tab and select Edit Config (usually no password required).
Ensure your SSD actually uses the YS9082HP. You may need to open the enclosure to look at the controller chip (the square chip with "Yeestor" or "SiliconGo" written on it). 2. Enter ROM Mode (Crucial Step)
Click . When the program prompts you for an administrative password, leave the input field blank and press OK . ys9082hp mptool repack
The MPTool cannot overwrite firmware while the controller is running its corrupted internal code. You must force the drive into a hardware safe-state:
A streamlined setup that does not require proprietary factory hardware. : Open the Parameter tab and select Edit
A proper repack combines the correct firmware version and the correct flash configuration for specific die types (e.g., N38A, N48R, B47R, 3DV7). Using a "generic" tool or one intended for a different flash type will not work.
Click . The software should instantly identify your drive on an assigned virtual port (e.g., Port 2). The MPTool cannot overwrite firmware while the controller
Because Yeestor’s MPTools are intended for manufacturing facilities and Authorized Service Centers, the official versions can be incredibly difficult to find, are often written in Chinese, and lack documentation.
Take your tweezers or paperclip and firmly bridge (short) these two pads together.
